SHARP PN-V701

Product Description

The Sharp PN-V701 was developed specifically for use in multi-monitor installations in either portrait or landscape orientation. Just imagine the power of a video wall built out of the PN-V701. Huge, high-impact video walls can be created using fewer monitors with less bezel interruption across the entire on-screen image.

Product Interest Form

Fill in the following form in order to get in touch with us about this product.

  • This field is for validation purposes and should be left unchanged.

ID Setting

Thanks to its RS-232C interface, the PN-V701 can be easily controlled and monitored from a central location via a PC. Each monitor can be assigned an individual ID code to specify when remotely turning that monitor on or off, changing its input, or making various screen adjustments and settings.

Scheduling

For total ease of operation, the Schedule function allows up to eight settings to be pre-programmed for automatic monitor turn on/off at precise times on a daily, weekly, or one-time basis.

Log Saving/Output

To boost the troubleshooting efficiency of service technicians, operating logs, signal changes, information on operating irregularities, and other such data can be saved and tracked.

Hardware Diagnostics

The Hardware Diagnostics function detects any irregularities in power supply voltage and indicates it on the monitor.

E-Mail Notification

With the E-Mail Notification function, display status updates will be sent periodically to a specified e-mail address. A notice will also be sent if a malfunction occurs.

Web Browser Setting

The PN-V701 can be easily operated through a Web browser and monitor control software*.

* Available separately

SNMP Support

Display status, continuous operating time, and other parameters can be monitored over a local area network using Simple Network Management Protocol (SNMP).

Self Adjust Function

With an analogue PC connection, when a change occurs to the input signal timing, the clock phase will automatically adjust accordingly.

Control Kit (PN-ZR02)
When one of the monitors in a video wall is fitted with a remote control sensor box, all of the monitors can be conveniently operated through one remote control unit.

Remote controller

Remote control sensor box

 

HDBaseT Receiver Board (PN-ZB03H)

Supported standardHDBaseT 2.0
Maximum resolution4,096 x 2,160 (30 Hz)
Copy protectionHDCP pass-through
Transmission distanceUp to 328 feet / 100 m
Input/output terminalsHDBaseT x 1,
LAN x 1 (10Base-T/100Base-TX),
USB x 1 (USB 2.0)
Power supplyFrom the monitor